{"id":9419,"date":"2026-08-31T14:54:45","date_gmt":"2026-08-31T06:54:45","guid":{"rendered":"https:\/\/taizyagromachine.com\/?post_type=info&p=9419"},"modified":"2026-08-31T15:04:16","modified_gmt":"2026-08-31T07:04:16","slug":"south-africa-dairy-t60-baler-wrapper","status":"publish","type":"info","link":"https:\/\/taizyagromachine.com\/ru\/Info\/south-africa-dairy-t60-baler-wrapper\/","title":{"rendered":"South Africa Dairy Operation Buys T60 Double-Film Baler Wrapper for Lucerne and Maize Silage"},"content":{"rendered":"

An exciting piece of news to share! A commercial dairy and beef operation in the South African Free State ordered one T60 double-film baler wrapper<\/strong> to consolidate its silage workflow. The T60 produces a \u03a6550\u00d7550 mm bale weighing 80-120 kg, runs at 60-85 bales\/hour on a 7.5 kW 6-pole motor, and weighs 1,242 kg in a 4,950\u00d71,500\u00d71,950 mm footprint.<\/p>

The customer replaced a separate fixed-chamber baler and a separate wrapper with the single T60, cutting labor from three operators to one and reducing film use by about 12% thanks to the integrated double-film wrapping.<\/p>

This case is worth reading if you run a mid-size dairy or beef operation in a semi-arid region, evaluate integrated baler-wrappers against separate machines, or balance lucerne and maize silage in the same workflow.<\/p>

\"double-film
double-film baler wrapper<\/figcaption><\/figure> <\/div>

Customer Background: A Free State Dairy and Beef Operation<\/strong><\/h2>

The customer runs a 480-head Holstein dairy and a 600-head beef feedlot near Bethlehem in the Free State province of South Africa, at roughly 1,650 m elevation. The farm grows 220 hectares of irrigated lucerne (alfalfa) and 180 hectares of dryland yellow maize for silage, producing around 5,500-6,500 tonnes per year. <\/p>

The previous workflow used a fixed-chamber round baler feeding into a stand-alone wrapper, requiring three operators (baler, telehandler, wrapper) and producing 35-40 wrapped bales per hour. The critical problem was the 30-90 minute gap between baling and wrapping in summer, which was costing measurable dry matter and aerobic spoilage at the bale surface.<\/p>

Why the T60 Double-Film Baler Wrapper<\/strong><\/h2>

The T60 was chosen for three reasons, all tied to the same goal: shrink the time between chopping and sealing the bale.<\/p>

  • One machine, one operator, zero gap between baling and wrapping.<\/strong> The T60 forms the bale and wraps it in the same chassis. The bale never leaves the machine until it is fully wrapped and ready for the storage stack. With the old setup, surface spoilage at the 30-90 minute interface was costing 4-6% of dry matter per bale. With the T60, that gap is gone.<\/li>
  • Double-film wrapping.<\/strong> The T60 carries two film rolls and lays them on the bale simultaneously, which is faster and produces a tighter oxygen barrier than single-film wrap. In the customer’s testing, double film reduced the number of torn or punctured bales during transport and stacking by roughly a third.<\/li>
  • \u03a6550\u00d7550 mm bale, the right size for the operation’s feeding and resale channels.<\/strong> The 80-120 kg bale weight is light enough for one worker to handle with a spike for the farm’s smaller paddocks, and small enough to fit through the customer’s existing bale-storage shed door (1.8 m wide). Larger 1.2 m diameter bales would have required a telehandler every time and a wider shed door.<\/li> <\/ul>
    \"silage
    silage dual-film bale wrapper for sale<\/figcaption><\/figure> <\/div>

    Baler Wrapper Machine Specifications<\/strong><\/h2>
    \u041f\u0430\u0440\u0430\u043c\u0435\u0442\u0440<\/th>\u0421\u043f\u0435\u0446\u0438\u0444\u0438\u043a\u0430\u0446\u0438\u044f<\/th><\/tr><\/thead>
    \u041c\u043e\u0434\u0435\u043b\u044c<\/td>Taizy T60 Double-Film Baler-Wrapper<\/td><\/tr>
    Bale size (diameter \u00d7 width)<\/td>\u03a6550 \u00d7 550 mm<\/td><\/tr>
    \u0412\u0435\u0441 \u0442\u044e\u043a\u0430<\/td>80-120 kg per bale (crop and moisture dependent)<\/td><\/tr>
    \u0415\u043c\u043a\u043e\u0441\u0442\u044c<\/td>60-85 bales\/hour<\/td><\/tr>
    \u0421\u043e\u043e\u0442\u0432\u0435\u0442\u0441\u0442\u0432\u0443\u044e\u0449\u0430\u044f \u043c\u043e\u0449\u043d\u043e\u0441\u0442\u044c<\/td>7.5 kW 6-pole electric motor<\/td><\/tr>
    Footprint (L \u00d7 W \u00d7 H)<\/td>4,950 \u00d7 1,500 \u00d7 1,950 mm<\/td><\/tr>
    \u0412\u0435\u0441 \u043d\u0435\u0442\u0442\u043e<\/td>1,242 kg<\/td><\/tr>
    \u0418\u0441\u0442\u043e\u0447\u043d\u0438\u043a \u043f\u0438\u0442\u0430\u043d\u0438\u044f<\/td>3-phase 380V \/ 50Hz (with transformer for 525V South African sites on request)<\/td><\/tr>
    Wrapping system<\/td>Dual-film stretch wrapper, 4-6 layer overlap adjustable<\/td><\/tr>
    Film width<\/td>250 mm \u00d7 2 rolls<\/td><\/tr>
    Operator requirement<\/td>1 operator + 1 telehandler for stacking<\/td><\/tr>
    Output<\/td>Lucerne silage, maize silage, oat silage, sorghum silage<\/td><\/tr><\/tbody><\/table>
    T60 spec sheet as shipped to the South African customer<\/figcaption><\/figure>

    South African farms typically run on 525V three-phase at 50Hz, not the 380V standard on most Chinese-built equipment. Taizy supplied a step-up transformer (525V \u2192 380V) with the shipment, sized to handle the T60’s 7.5 kW draw with a 30% headroom for motor starting surges. The transformer is housed in a separate IP54 cabinet installed next to the machine shed.<\/p>

    \"round
    round baler wrapper for silage<\/figcaption><\/figure>
    \"grass
    grass baler wrapper with double film<\/figcaption><\/figure> <\/figure>

    Two Crops, One Workflow: Lucerne and Maize Silage<\/strong><\/h2>

    The T60 baler wrapper runs two distinct silage programs across the year. The setup changes between them take about 20 minutes: film tension, pre-cut selection on the pickup, and bale density pressure.<\/p>

    Setting<\/th>Lucerne silage (Oct-Apr)<\/th>Yellow maize silage (Feb-Mar)<\/th><\/tr><\/thead>
    Pre-cut length<\/td>Short (12-18 mm)<\/td>Long (25-35 mm)<\/td><\/tr>
    Target moisture at baling<\/td>55-62%<\/td>62-70%<\/td><\/tr>
    \u041f\u043b\u043e\u0442\u043d\u043e\u0441\u0442\u044c \u0442\u044e\u043a\u0430<\/td>Medium (lower pressure)<\/td>High (full pressure)<\/td><\/tr>
    Film layers<\/td>4 layers (stable bales, fast consumption)<\/td>6 layers (long-term storage, 12+ months)<\/td><\/tr>
    Throughput<\/td>70-85 bales\/h (lighter crop)<\/td>60-70 bales\/h (denser, heavier bales)<\/td><\/tr>
    Average bale weight<\/td>85-95 kg<\/td>100-120 kg<\/td><\/tr><\/tbody><\/table>
    Operating settings for the two main crops<\/figcaption><\/figure>

    Lucerne at 60% moisture and short pre-cut is the easier run\u2014light, fluffy bales come off the T60 at the top of its range. Maize at 65-70% moisture with longer pre-cut is heavier and slower. The T60’s variable bale chamber pressure is the most-used control across the year, and the dual-film wrap is the same in both programs.<\/p>

    Real-World Performance in the First Season<\/strong><\/h2>

    The T60 was commissioned in late October 2025 in time for the first lucerne cut of the season. Numbers from the first 90 days of operation are below.<\/p>

    • Bales produced:<\/strong> 6,840 bales in 90 days, of which 4,520 were lucerne and 2,320 were maize.<\/li>
    • Average hourly throughput:<\/strong> 72 bales\/h across both crops, peaking at 84 bales\/h on a clean, dry lucerne cut and bottoming at 58 bales\/h on a wet maize run after light rain.<\/li>
    • Film consumption:<\/strong> 4.3 rolls per 100 bales on lucerne, 5.8 rolls per 100 bales on maize (because of the 6-layer wrap). Both numbers are within Taizy’s expected range.<\/li>
    • Bale quality after 60 days of storage:<\/strong> 1.8% of bales showed surface mold on opening. The customer’s old process ran 5-7% spoilage at the same 60-day mark.<\/li>
    • Labor:<\/strong> Down from 3 operators to 1 operator + 1 telehandler driver. The telehandler was already in use for bunker silo packing, so its marginal cost was zero.<\/li>
    • Downtime:<\/strong> One belt replacement and one film-roll holder adjustment in 90 days. Total unplanned downtime: 4 hours across 6,840 bales.<\/li> <\/ul>

      The customer did the math for the article: 6,840 bales \u00d7 4% dry matter improvement \u00d7 average 95 kg per bale \u00d7 ZAR 3,500\/tonne silage value = roughly ZAR 91,000 in dry-matter savings in the first 90 days alone, before counting labor.<\/p>

      Delivery, Installation, and First-Cut Commissioning<\/strong><\/h2>
      • Order placed:<\/strong> Q3 2025, one T60 with 525V step-up transformer, spare belt set, spare film roll holder, and a 1,000-roll initial film order.<\/li>
      • Production completed:<\/strong> 12 working days after deposit confirmation.<\/li>
      • Shipping route:<\/strong> Qingdao \u2192 Port of Durban by FCL sea freight, 28 days door-to-port, plus 12 days for South African Revenue Service (SARS) customs clearance, port handling, and 300 km inland trucking to Bethlehem in the Free State.<\/li>
      • Installation:<\/strong> 1 day for offloading and placement in the existing machine shed, 1 day for the electrical contractor to wire the 525V transformer and run a 16 mm\u00b2 three-phase cable to the T60’s junction box, half a day for commissioning and operator training.<\/li>
      • First commercial run:<\/strong> Day 4 after arrival, 78 lucerne bales in the first 90-minute shift.<\/li> <\/ul>

        Taizy provided a video commissioning call via WhatsApp and a printed English-language operator manual. The customer’s existing baler operator learned the T60 silage baler wrapper’s chamber pressure and film-overlap controls in a single morning. No service engineer traveled to the site.<\/p>