9ZRF-3.8 Chaff Cutter Machine Shipped with 3 Screens for Multi-Size Feed to Senegal
In Q2 2026, a Senegal-based livestock cooperative took delivery of one 9ZRF-3.8 chaff cutter and crusher from Taizy. The unit runs on a 3-4.5 kW electric motor and processes up to 3,800 kg of forage per hour. The shipment was configured for multi-livestock use: cattle, sheep, and goats all share the same feed-prep line, with three screen sizes to switch between particle cuts.
Why the 9ZRF-3.8 Chaff Cutter Machine Fits a Senegalese Cooperative
Small-to-mid livestock operations in West Africa typically run on single-phase or three-phase power, and labor is the highest cost. The 9ZRF-3.8 grass cutting and grain crushing machine is sized for that profile: a 3-4.5 kW motor runs off standard farm power, and the 3.8 t/h throughput replaces 4-5 workers hand-chopping forage.
The three included screens (2 mm, 4 mm, and 6 mm) are the deciding factor. The buyer can switch from fine-cut goat feed to coarse cattle fodder in under two minutes—no extra purchase required.
9ZRF-3.8 Specifications
| Параметр | Value |
|---|---|
| Модель | 9ЗРФ-3,8 |
| Власть | 3-4.5 kW electric motor |
| Емкость | 3,800 kg/h |
| Dimensions (L×W×H) | 1700 × 1200 × 1500 mm |
| Масса | 102.5 kg |
| Screens included | 3 pcs (2 mm, 4 mm, 6 mm) |
| Spare parts included | 1 set of hammers and knives |
What’s in the Shipment to Senegal?
- 1 × 9ZRF-3.8 main machine (export plywood case)
- 3 × screens (2 mm / 4 mm / 6 mm)
- 1 × spare set of hammers and knives
- English / French operation manual
- Wiring diagram and motor connection guide
Total shipment: 1 wooden crate, 0.85 m³, gross weight 145 kg. Shipped by sea to Dakar port with a 30-40 day transit window.
Application Notes for West African Buyers
Use the 6 mm screen for cattle and draft animals that need long-cut roughage. Switch to 4 mm for sheep and the 2 mm screen for goats and young stock. The hammer-and-knife design handles dry grass, fresh Napier grass, peanut straw, and millet stover without clogging, provided the moisture content stays below 18%.
The spare hammer and knife set is included because these are the highest-wear parts; a 102.5 kg portable machine with rotating hammers will need blade replacement every 250-300 working hours in typical Sahelian forage.
Order a 9ZRF-3.8 Chaff Cutter Machine for Your Operation
Send us your daily forage volume, livestock type, and available power (single-phase or three-phase). We will confirm the right motor spec, screen configuration, and shipping cost to your West African port. WhatsApp: +86 13673689272 · Email: info@taizyagromachine.com.