Mislukkingsontleding van gekombineerde grondboondoop-eenheid
As multifunctional equipment, the combined peanut shelling unit has two important functions: cleaning and shelling at the same time. However, in the process of using it for a long time, you may occasionally encounter some malfunctions and problems. These failures may affect the normal operation of the grondboontjie skoonmaak en dop masjien and reduce productivity. Therefore, understanding and solving these common faults is the key to ensuring the smooth operation of peanut shelling units. Next, we will introduce some common fault situations one by one and provide solutions to ensure that you can make full use of the combined peanut shelling unit’s functions and achieve efficient peanut processing.
Fault analysis and troubleshooting of peanut cleaning machine
| S/N | Failures | Cause analysis | Troubleshooting method |
| 1 | Fan does not work | the motor is damaged, out of phase | check or replace the motor |
| 2 | Low production | a, motor, suction fan reversal b, whether sorting sieve adjustment is smooth c, low voltage, not enough vibration times d, whether the gate handle is properly opened and closed | a, adjust the power line b, adjustment & fixed c, adjustment d, properly open and close the gate handle |
| 3 | Peanut fruits are sucked by the fan | a, too much feeding b, too large air volume c, clogging of debris at the material outlet | a, control the gate handle b, pull open the air volume adjustment plate c, stop the machine to clear out the blockage |
| 4 | Big noise | a, stop and check the rotating parts b, whether the bucket is collision c, whether the suction fan wheel is blocked | a, repair and eliminate b, adjustment c, stop the machine to clean and take off objects |
| 5 | Sorting sieve work swing degree is large | crankshaft connecting rod bearing damage | replacement |
Fault analysis and troubleshooting of combined peanut shelling unit
| S/N | Failures | Cause analysis | Troubleshooting method |
| 1 | Fan does not work | The fan does not work | repair & replace |
| 2 | High crushing rate | a, incorrect choice of cage fence b, peanut fruit is too dry, water content <10%, more than GB1532-79 regulations c, blockage of the drop port d, the kernel comes back to the sorting sieve, sent to the roller e, cage fence damage, too large gap, and when through sorting sieve, the peanut kernels come back to roller f, large difference in size of peanut fruit | a, replace the cage fence b, add humidity c, clear out the debris d, adjust the nut stopper e, stop and repair f, replace the cage grid |
| 3 | Blockage of feeding device | a, too much material returned from the sorting screen b, low voltage, insufficient speed, small wind power c, blockage of wind feeder inlet, small inlet air volume d, peanut fruit containing too much moisture e, damage to fan wheel, bearing | a, adjust the sorting sieve, adjust the wind plate b, stop the machine to check c, stop the machine to clear d, drying peanut fruit e, replace and repair |
| 4 | Shell with small fruit and small kernel | large suction fan air volume | open the air volume adjustment hole |
| 5 | Low working efficiency | a, too wet peanut fruit b, low voltage c, small peanut fruit | a, drying b, find an electrician to help c, sStop the machine and change the position of the push-pull lever to adjust the gap |
| 6 | Increased machine noise | a, loose bolt b, bearing damage c, screwed rope or blockage in the cage fence | a, tighten b, replace c, stop the machine to clean the debris |
The above is only a partial list of reasons for the failure of the combined peanut shelling unit, if you have other problems in the process of use, welcome to call to communicate over the exchange. And if you’re interested in our peanut sheling machine , welcome to contact me at any time!