3 steps to an effective corn grits manufacturing process strategy

The finished products that come out of the corn grits manufacturing process are corn grits and corn flour, which are very common in people’s daily lives and are an important part of people’s daily food in the world.

How do you use the corn grits machine to produce corn flour and corn grits? What is the whole production process like? Generally speaking, the maize grits making process can be divided into three steps: peeling, grits making, and grading. Please listen to the following.

1. Peeling – Preparation of the corn grits manufacturing process

This is the first step in the maize grits making process. The main purpose is to peel and flake the kernels. Both T1 and T3 grits machines use wet peeling in this process, adjusting the distance between the peeling knife and the pressure roller so that the corn can be peeled and flaked better.

It is important to note that after the first peeling, if you think the peeling is not enough, you can peel again until you are satisfied.

2. Grits – the key to the grits making process

Once the corn peeling is completed, the corn grits can be made. To make grits, pull open the inserting plate of the feed inlet and adjust the crushing handle, also observe the particle size of the grain at the outlet in order to adjust it to the right level.

During the corn grits manufacturing process, pay attention to the finished product. If you need to make any changes, you can do so by using the handle, as it allows you to control the size of the finished grits to achieve the best results.

3. Finished product grading – the end of the maize/corn grits manufacturing process

During the grits making process, there are three finished products: large grits and small grits. The separation of these three products is mainly achieved by the separator.

Under the rotating action of the brush and pushing plate, the finished corn products travel rapidly rotating toward the outlet, and flour, fine grits and coarse grits are discharged from their respective outlets to achieve the purpose of grading.

The sizing screen is necessary. It can also be selected according to the customer’s needs.

In short, as long as you can master the above three steps in the whole corn grits manufacturing process, you can use the maize grits making machine simply and effectively.